The fastest way to make an AR glass purchase go wrong is to ask only for “non-reflective glass.” The supplier needs the grade, coating side, substrate, thickness, optical target, finished sizes, processing, quantity and destination. The answers below cover the questions that most often affect selection, price and installation.
FAQ
Q1: What is anti-reflective glass?
AR glass is glass with an optical coating that reduces surface reflection through light-wave interference. It is designed to improve viewing clarity and transmission. It is not the same as anti-glare glass, one-way mirror glass or mirror-display glass.
Q2: How do AR98, AR94, UV75, UV Shield 80 and UV99 differ?
AR98 and AR94 are separate anti-reflective grades selected for visible clarity and reflection control. Their names are grade designations, not a complete test specification. Legacy UV75 retains its historical designation and factory inspection record; UV Shield 80 is a separate product, not a renaming of UV75. UV99 is a higher UV-blocking requirement whose construction must be specified; a laminated or other composite route may be needed rather than a standard coated monolithic sheet.
UV Shield 80 product · UV Shield 80 technical data · Public test report library · Request the UV Shield 80 sample report
Q3: What transmission and reflection can anti-reflective glass achieve?
Selected high-performance double-sided AR configurations reach up to 99% visible transmission and below 0.5% reflection. Keep these values with the selected coating, substrate, thickness, measurement band and method; do not read every AR98 or an AR99 designation as a guarantee of the same figures. AR94 and AR98 sample results are available in the report library. UV Shield 80 has its own 2.0 mm double-coated reference: approximately 80.5% weighted UV rejection at 280–380 nm and 98.5% visible transmission at 380–780 nm, as defined in its TDS.
Q4: How much is 2-3mm double-sided AR98?
For a roughly 500 sqm picture-frame order, the reference is about USD 30/m² FOB China. Finished dimensions, cutting yield, packing and order mix can change the quote.
Q5: How much is 5-6mm AR98 raw sheet?
The reference is about USD 20/m² FOB China for double-sided raw sheet without processing. Cutting, edgework, holes, tempering, packing and freight are additional quotation factors.
Q6: How much is 8/10/12mm AR98 raw sheet?
The reference is about USD 25/m² FOB China for double-sided raw sheet, commonly considered for showcase doors and large display glazing.
Q7: What are the AR94 and laminated museum references?
The reference is about USD 20/m² for 3.2mm AR94 raw sheet and about USD 25/m² for 5-8mm AR94 single sheet used in a laminated museum structure. A finished 5+1.14PVB+5 or 6+1.14PVB+6 laminated AR construction is about USD 100-150/m² as a planning reference.
Q8: How much does tempering cost?
The AR glass tempering fee is about USD 15/m² as an early planning reference. Exact cost depends on thickness, size, yield, holes, edgework and processing difficulty.
Q9: Can anti-reflective glass be cut, edged, drilled, tempered and laminated?
Some AR constructions support cutting, edging, drilling, tempering, chemical strengthening, lamination or insulating-glass assembly. Confirm compatibility and the fabrication sequence for the selected coating. Approve color tolerance, coating-edge quality and the agreed thermal cycle on samples; a furnace temperature is not a service-temperature rating.
Q10: Can the AR coating survive cleaning and scratches?
The selected durable AR coating supports 5,000 reciprocating 0000# steel-wool rubbing cycles at 1 kg load without peeling or visible coating damage. This is a product-specific durability result, not a test of every AR or UV-protective grade. Match the supplied grade and agreed procedure to the test record. Use the selected grade’s cleaning instructions, remove grit first, and avoid metal scrapers, abrasive pads and dirty separators.
Q11: What size can North One Glass supply?
Overall coating and partner-processing resources support eligible projects up to 3,300 × 19,000 mm. This does not mean that every film system or in-house machine accepts that size. Review coating, thickness, finished processing, handling, packing and transport separately. UV Shield 80 has its own delivered maximum of 2600 × 6000 mm; use the product-specific sheet formats for that grade.
Q12: How is anti-reflective glass packed for export?
The confirmed packing route uses fully enclosed fumigation-free reinforced wooden crates, anti-mildew paper or polymer powder, internal steel straps, shock-resistant timber bases and moisture protection. Full transport insurance is arranged for each confirmed shipment, and the packing system is designed for zero-breakage arrival under the agreed handling route.
Q13: Can anti-reflective glass be used on a holographic display or abyss mirror?
Yes, as the outer anti-ghosting cover glass. It reduces secondary reflections from the cover surface and improves image purity and visual depth. It does not replace the semi-reflective core glass, and a one-way privacy window still requires one-way mirror glass.
Q14: What must be sent for a reliable quotation?
Send the application, grade or optical target, coating side, substrate, thickness or laminated build-up, finished dimensions and quantity by size, processing drawing, sample or inspection requirements, packing, destination, trade term and schedule.
Q15: Can anti-reflective glass be used outdoors for a long period?
Selected outdoor coated-glass products carry a 20-year warranty. Coverage belongs to the specified grade, processing route and installation conditions; it does not extend automatically to every AR, UV or laminated product. Confirm the applicable warranty document with the quotation and use suitable supports, seals, drainage and maintenance for the complete installation.
Q16: Are samples available and can North One Glass match an existing sample?
Standard A4 AR samples are free; the buyer provides a DHL, FedEx or UPS account or pays the courier freight. A customer sample can be measured with the PerkinElmer Lambda 950 for transmission, reflection spectra and LAB color, and a matched trial sample can be prepared within 48 hours.
Q17: Where is North One Glass anti-reflective glass used?
Applications can include facade glazing, display cover glass, appliance touch panels, showcases, framing and projection assemblies, depending on the selected construction. Use the published case studies for specific North One Glass project experience; an application example does not identify a customer or prove supply to a named brand.
Application Selection
For project selection, review the application, sample, optical target, drawing, safety construction and installation conditions. Ask for documents covering the selected product rather than treating an application illustration as proof of a completed customer project.
Final Buying Check
Do not compare one supplier's raw-sheet price with another supplier's finished laminated price. Keep the grade, substrate, coating sides, thickness, finished dimensions, processing, quantity, packing and trade term identical. Then ask for a sample or inspection route that matches the actual lighting and use condition. See the AR product family, North One Glass AR product page and AR price guide.
Coating sizes up to 3,300 × 19,000 mm are available for eligible projects. Confirm the product, coating process, substrate, thickness, panel weight, handling, transport and delivery conditions. Finished cutting, edging, tempering and other downstream processes have separate limits.
Match performance claims to the tested glass
Select the glass grade, thickness, coated sides, processing and test method together. A steel-wool cycle count requires its own sample, load and procedure record; a tempering-process temperature is not a continuous operating-temperature rating. Warranty coverage is agreed in writing for the selected model and project. Legacy UV75, UV Shield 80 and UV99 are separate designations and must keep their own measurement methods and evidence.
Read the AR98 optical report, AR94 sample report and Legacy UV75 factory inspection. Request a matching record through technical document support.
Display and Framing Glass Selection Questions
What should a museum glass vs regular glass comparison include?
A museum glass vs regular glass comparison should include visible reflection, transmission, UV filtering, glazing construction, artwork clearance and handling. Museum glass for framing and museum acrylic options should each have their own measured optical specification and cleaning method. Define the display and conservation requirements, then select the matching anti-reflective or UV-filtering grade and sample.
Review the product family and send the project requirements for a coating and fabrication review.
