Temperable Mirror

Temperable Mirror vs Tempered Mirror

Understand the difference between a mirror coating that can enter a tempering process and a mirror panel that has already been tempered.

By Published Updated Topic Technical Knowledge
Large mirror sheets stored vertically on a workshop rack

Temperable mirror vs tempered mirror describes the supply form and processing stage of the coated glass. Temperable mirror material is prepared for an agreed fabrication and heat-treatment route. A finished tempered glass mirror has completed that route. State the required form with the final dimensions, edgework, holes, coating grade and safety construction before requesting samples or a quotation. Review tempered and temperable mirror options and temperable mirror glass fabrication.

TL;DR

  • Order temperable mirror when an approved fabricator will cut, edge, drill, wash, and temper the coated stock.
  • Order tempered mirror when the supplier is responsible for delivering the panel after heat treatment.
  • Confirm the exact process route before cutting. Coating side, furnace settings, washing, handling, inspection, and post-tempering fabrication limits matter.

Why the distinction matters

Tempering changes the glass through controlled heating and cooling. Most cutting, drilling, notching, and edge shaping must be completed before that process. A coating that is suitable for an approved tempering cycle still needs correct orientation and handling. It should not be assumed compatible with every furnace recipe, substrate, thickness, ceramic ink, laminating route, or local standard. An already tempered mirror arrives with its safety-glass processing completed. Its final dimensions and holes should therefore match the approved drawing. Post-tempering cutting or drilling is generally not the normal route and can cause failure.

Define who owns each step

A useful production brief identifies:

The Temperable Safety Mirror category describes the product family. The temperable mirror reference grades provides the approved reference values that should be reviewed for the actual order. Other coated options are listed in the products hub.

  • who supplies the coated stock;
  • who cuts, edges, drills, washes, and tempers it;
  • substrate, nominal thickness, dimensions, tolerances, and edge quality;
  • coating orientation through the furnace and in the final installation;
  • required safety standard and test documentation;
  • visual, optical, dimensional, fragmentation, and coating acceptance checks;
  • packing and surface-protection method after processing.

Sample approval before volume production

When a new furnace, thickness, substrate, or processing combination is involved, use a representative trial rather than assuming the result from an unrelated job. Agree on the inspection method and acceptance boundary before production. This prevents the word “temperable” from becoming an unsupported promise about every possible process.

FAQ

Does temperable mirror arrive already tempered?

Not necessarily. The term usually means the coated material is intended for an approved downstream tempering route. The order must state whether delivery is before or after tempering.

Can holes be drilled after the mirror is tempered?

The normal production route is to complete holes, notches, edgework, and shaping before tempering. Final drawings should be approved before heat treatment.

What should a fabricator provide for technical review?

Send the glass build-up, drawing, substrate and thickness, furnace type and intended cycle, coating orientation, processing sequence, required standard, quantity, and destination through the contact page.

Mirror Fabrication and Finished-Panel Questions

How should laminated safety glass and tempered mirror constructions be compared?

Laminated safety glass and tempered glass describe different construction choices. For a laminated mirror or coated panel, specify the glass layers, interlayer, layer thicknesses, coating orientation, edge design and any tempering requirement. Review optical appearance and the accepted safety construction as a complete assembly with the selected coating and fabrication route.

Review the product family and send the project requirements for a coating and fabrication review.

Browse Products

Related Products

Keep Reading

Related Articles

Large mirror sheets stored vertically on a workshop rack
Technical Knowledge

How Temperable Mirror Works: Manufacturing, Tempering and Quality Inspection

Temperable Mirror works by replacing conventional silver backing and paint with a vacuum-sputtered hard metal and metal-oxide coating on float glass. The coating bonds to the glass and tolerates cutting, edging, drilling and physical tempering above 600°C without peeling, blistering, discoloration or edge chipping. Quality checks include 5000-cycle steel-wool testing, ΔE color stability, SGS/CNAS reports and weathering review.

Read More: How Temperable Mirror Works: Manufacturing, Tempering and Quality Inspection