UV Shield 80 for Framing and Artwork Displays
Start with the 2.0 mm low-iron, double-coated reference: 80.5% weighted UV rejection, with a stated UV band of 280–380 nm, 98.5% visible transmission over 380–780 nm using D65 weighting, and less than 1% reflection per coated surface. These are separate measurements, not interchangeable UV or whole-sheet reflection claims.
| Selection need | Product route |
|---|---|
| Framing with defined UV reduction | UV Shield 80, with a sample-specific report and the named UV method |
| AR without that UV specification | Compare the separate AR98 and AR94 constructions |
| Safety glazing or a different UV target | Review the complete thickness, laminate and coating construction with its own measurements |
Evidence from a European Framing Project
The UV Shield 80 development case explains why an arithmetic UV average did not meet the EN 410-weighted target, how thirteen candidate samples were evaluated, and how customer laboratory feedback led to trial supply and a long-term agreement. Visible-light evaluation uses 380–780 nm; the current V1.1 TDS defines the reference construction and D65 weighting.
Specify the Finished Panel
Regular stock thicknesses are 2.0 and 3.2 mm; the product TDS lists a manufactured and delivered maximum of 2600 × 6000 mm. Share the frame or showcase drawing, thickness, edge finish, holes, quantity, safety construction, packing and destination. Evaluate the glass against the intended artwork and lighting.
Check measurement conditions · Request a matching optical report · Request framing glass samples